Tokyo Keiki KRG-10, Руководство пользователя

Страница: 70 / 200

5-15
[3-4] Minimum Value
Enter the minimum value of analog current output range.
[3-5] Maximum Value
Enter the maximum value of analog current output range.
[3-6] Alarm Output Factor
Enter the factor of alarm output.
0: No Receiving Echo
Select if alarm is output when echo cannot be detected
1: Device Failure Select if alarm is output when the device failure
2: Both Select if alarm is output when echo cannot be detected or the device failure
[4-0] Averaging Time
Measuring value is averaged in accordance with [sec] setting.
[4-1] Median Filter
Set allowable value using calculation to get accurate measured value.
Please refer to
6.6.1 Measurement Support for the details.
[4-2] Re-search Delay
Time delay after loss of surface echo until search in accordance with [sec] setting.
[4-3] Alarm Delay
Time delay after loss of surface echo until alarm signals in accordance with [sec] setting.
[4-4] Surface Detect Mode
Enter the echo detected as the liquid level echo.
0: Max Echo
Max strength echo defined as surface echo
1: First Echo First echo defined as surface echo
Distance
First Echo
Max Echo
Fig. 5.4.5 Surface Detect Mode
[4-5] Negative Level as Zero
While this function is "On", zero level will be outputted instead of negative level.
0: Off
1: On