Tokyo Keiki KRG-10, Руководство пользователя

Страница: 144 / 200

6-69
(2-2) Checking each measurement parameter by graph
To confirm device measurement values by graph for each parameter, switch the operation
mode in the measurement operation area to "Graph". A maximum of two graphs can be
displayed simultaneously in the measurement sub-menu display area. The graphs to display
can be selected from those in "Display" in the measurement operation area.
Fig. 6.9.5 Selecting a display graph
Each type of graph 1 / graph 2 display parameters can be changed by selecting "Graph 1" or
"Graph 2" in the measurement operation area. It is not possible to select the same
parameters in graphs 1 and 2 simultaneously.
Fig. 6.9.6 Switching graph 1 display parameters
Fig. 6.9.7 Switching graph 2 display parameters
To initialize all measurement data, click [Graph] --> "Initialize" button. This clears the history
and graph display of all measurement parameters. Be aware that once data has been
initialized it cannot be restored to its original state thereafter.
Graph 1 + Graph 2 Display
Graph 1 Only Display Graph 2 Only Display