Tokyo Keiki KRG-10, Руководство пользователя

Страница: 128 / 200

6-53
It is possible to change the display range of the graph by right clicking on the graph and then
dragging. Also, it is possible to perform zoom up and zoom reset by dragging downward to the
bottom right on the graph and by dragging upward to the left on the graph, respectively.
Fig. 6.8.4 Graph zoom up and zoom reset
(3) Noise table operations
It is possible to edit the read noise table on the graph. There are 6 editing methods, which are
as follows:
- Directly editing the noise table points
- Reverting the edited noise table to its state prior to editing
- Using the assist tool to gather together a two-point interval of noise table points to make a
linear plot
- Using the rejector to set the minimum value of the noise table
- Automatically setting the noise table in the echo curve data
- Initializing the noise table
(3-1) Directly editing the noise table points
The mouse can be used to directly specify noise table points on the graph to edit. Use the
mouse to directly click the noise table point to edit and then simply drag it upward or
downward to change the value. The edited noise table will be displayed in the update color.
Zoom Up
Zoom Reset
Right click and drag
Left click and drag
Left click and drag