Tokyo Keiki KRG-10, Руководство пользователя, Страница: 145 / 200

6-70
(3) Stopping measurement
To stop device measurement, click [Measurement] --> "Stop" button. This stops measurement.
After measurement has stopped, the measurement mode display changes as follows. Details on
switching the measurement mode are described later.
Fig. 6.9.8 Measurement mode transition 2 (During measurement -> Measurement stop)
(4) Logging measurement values
Device measurement data can be saved to a file. To save measurement data to a file, place a
check mark for the log of the parameter that you want to save that is in the measurement value
display area
①
, and set the logging interval
②
and log file
③
. During logging, the logging status
④
is displayed in green, and when logging is stopped, the logging status is displayed in red.
Fig. 6.9.9 Logging settings
Be aware that when logging the Echo List (when there is a check mark for the Echo List log), a
logging interval less than 5 seconds cannot be specified. To set the file name and save location
for the log file, click the "Ref." button of the log file setting in the measurement operation area.
Then the following window is displayed.
During measurement
①
Log check
③
Log file
②
Logging interval
④
Logging status
Green: ON (logging)
Red: OFF (logging stopped)
Data update mode
Historical data mode
After measurement stops