Tokyo Keiki KRG-10, Руководство пользователя

Страница: 54 / 200

4-3
2) Analog out (in the case of use)
Please set analog output parameter, minimum output, maximum output.
For operation by LCD and 4-key, please refer to table 5.3.1 in
5.3 Key parameter list .
In usual case, other parameters are not to be set. However, in particular case, you need to change
parameters. please refer to
Chapter 7 Precautions on equipment settings .
Non-volatile memory stores parameter data while power off, so parameters are need to be set once.
If the measurement is not accurate or is impossible, please check the parameter and
installation(
Chapter 2 Installation ) and connection( Chapter 3 Electrical installation ).
Fig. 4.5.1 Basic setting parameters diagram