Tokyo Keiki KRG-10, Руководство пользователя

Страница: 119 / 200

6-44
6.7 Calibration
This section explains the functions of the calibration menu.
To open the calibration menu, click "Calibration" on the menu bar or menu selection panel.
6.7.1 Analog
In the analog menu, it is possible to read / write analog data (parameters) for the device. If you click
"Analog" tab or "Analog" in the tree display, the following window is displayed. Data that does not
match the status of the device will be displayed with a yellow ( ) and data that matches
the status of the device will be displayed with a white ( ). The color of cell will be displayed
with a light gray ( ) in case of the input error.
Fig. 6.7.1 Analog menu
(1) Reading analog data
To read the analog data from the device, click the "Read" button. After reading starts, wait
momentarily until the processing progress on the status bar stops.
(2) Writing analog data
To write the analog data to the device, input the data to write and then click the "Write" button.
After writing starts, wait momentarily until the processing progress on the status bar stops.
①
4mA calibration
button
②
20mA calibration
button
* If there is the
parameter that is not
written in at the
device, it becomes
the blue character.