Tokyo Keiki KRG-10, Руководство пользователя

Страница: 129 / 200

6-54
Fig. 6.8.5 Direct editing of the noise table points
To write the noise table to the device, click [Noise Table] --> "Write" button. The updated
points are written to the device.
(3-2) Reverting the edited noise table to its state prior to editing
If you want to revert an edited noise table to its state prior to editing, it is possible to return it
to its state immediately after it was read from the device by double clicking on the graph. At
this time, you can check that the noise table has returned to its previous state, because the
display color of the noise table will have changed from the update color to the normal color.
(3-3) Using the assist tool to gather together a two-point interval of noise table points to
make a linear plot
It is possible to use the assist tool to gather together a two-point interval of noise table points
to make a linear plot. To operate the assist tool, set the assist tool display in graph option on
the echo viewer operation area to ON ( ). Use the mouse to directly click on the
displayed assist tool, and simply drag left and right to match the reference point. Next, use
the mouse to directly click the edit point and simply drag up and down. This will make the
interval between the reference point and edit point linear, and all of the point values in that
range will change. The assist tool will move in the distance direction in agreement with the
noise table points. The edited noise table will be displayed in the update color.
Left click and drag
normal color (light blue)
update color (dark blue)
Noise table color