Tokyo Keiki KRG-10, Руководство пользователя

Страница: 109 / 200

6-34
Analog Current Output data
- Analog Current Output Parameter Content of parameters output at 4-20mA
(Level / Distance / Volume / Flow / Signal Amp.)
- Alarm Selection Content of alarm output
(High (22.0mA)/Low (3.6mA)/Hold)
- Minimum Output Setting value of analog current output parameter of 4mA
(Level / Distance (-99.999m to 99.999m),
Volume (0.0m3 to 99999.0m
3
),
Flow (0.0m3/sec to 99999.0m3/sec),
Signal Amp. (0dB to 200dB)
- Maximum Output Setting value of analog current output parameter of 20mA
(Level / Distance (-99.999m to 99.999m),
Volume (0.0m
3
to 99999.0m3),
Flow (0.0m
3
/sec to 99999.0m
3
/sec),
Signal Amp. (0dB to 200dB)
- Alarm Output Factor (*It is supported by firmware version 1.6.1 or later)
Factor causing alarm output
(No Receiving Echo / Device Failure / Both)
Analog Current Output Range data (*It is supported by firmware version 1.6.0 or later)
- Output Range Setting Content of analog current output range
- NAMUR NE43
Minimum Value: 3.8mA
Maximum Value: 20.5mA
- Legacy(4-20mA)
Minimum Value: 4mA
Maximum Value: 20mA
- Custom
Enter the Minimum Value and the Maximum
Value individually
- Minimum Value Setting the minimum value of analog current output
range. Only when Output Range Setting is “Custom”, this
value is settable.
(3.8mA to 4.1mA)
- Maximum Value Setting the maximum value of analog current output
range. Only when Output Range Setting is “Custom”, this
value is settable.
(19mA to 20.5mA)
The alarm output value does not change even if the Analog Current Output Range data was
changed.