Tokyo Keiki KRG-10, Руководство пользователя

Страница: 146 / 200

6-71
Fig. 6.9.10 Log file specification dialog box
After inputting the log file name in the file name input field
①
, click the "Save" button to specify
the log file. The log file is saved in csv format. To enable logging during measurement, click
[Logging] --> "On/Off" button to turn the logging status ON (green). If you start measurement
when the logging status is green, the measurement values will be saved in the log file. To finish
logging after stopping measurement, click [Logging] --> "On/Off" button to turn the logging
status OFF (red). If you repeat logging continuously without resetting the log file, measurement
values will be added to the current settings file. If there are more than 30,000 data in the log file
during logging, a file with an "appended number" appended to the end of the "specified log file
name" is automatically created, and data is continuously saved. Be aware that unless a new log
file is specified, the "appended number" continues to increase by 1 for every 30,000 data. An
operation example of automatic file creation is shown below.
The maximum capacity of log file when recording 30,000 data is approximately 4 [MB].
①
File name input field