Tokyo Keiki KRG-10, Руководство пользователя, Страница: 94 / 200

6-19
If connection is successful, the device information
②
of the connection destination is displayed as
shown in the following example. If you want to confirm the connection, do so by re-opening the
window. If connection failed, confirm the connection pathway.
Fig. 6.2.3 Device information when connection is successful (example)
6.2.2 Disconnection
To disconnect the configuration software from the device, click "Disconnect". After disconnecting, the
device information is reset.
6.3 Settings
This section explains the functions of the settings menu.
To open the settings menu, click "Config" on the menu bar or menu selection panel.
6.3.1 Basic Settings
On the basic settings menu, it is possible to read / write the basic settings data (parameters) for the
device. If you click "Basic Setting" tab or "Basic Setting" in the tree display, the following window is
displayed. Data that does not match the status of the device will be displayed with a yellow
( ) and data that matches the status of the device will be displayed with a white
( ). The color of cell will be displayed with a light gray ( ) in case of the input
error.
Fig. 6.3.1 Basic settings menu
* Only when antenna type is
following type, bore is
displayed.
- 2” pipe
- 4” pipe
* It is not possible to
simultaneously display
the volume calculation
menu and flow
calculation menu.
* If there is the
parameter that is not
written in at the
device, it becomes
the blue character.