Thermo Scientific Ion Torrent A45727 Скачать руководство пользователя страница 25

Страница: 25 / 163

• If a chip installed in a sequencer has unused lanes, do not remove it unless you

are sure that you want to replace it with a new chip. After a partially used chip

has been removed from the sequencer, it cannot be reinserted and reused. The

sequencer cannot track lane usage after chip removal.

• You can remove a chip in one of the following situations.

– After all the lanes of a chip are used in a run, the chip shuttles to the install

position and you are asked to remove the used chip.

– When you select a run plan that requires more lanes than are available on the

installed chip, you are asked to remove the partially used chip, and the

sequencer performs a post-chip clean. In addition, you must clear

consumables from the lower sequencing reagents bay, even if only a single

lane of the chip was used.

• If a barcode plate in a sequencer has unused barcodes, do not remove it unless

you are sure that you want to replace it with a new barcode plate. After a

partially used barcode plate has been removed from the sequencer, it cannot be

reused. The sequencer cannot track barcode usage after the barcode plate has

been removed.

• After loading in the sequencer, reusable consumables, such as barcodes, chips,

and sequencing reagents bay components, must be used within 14 days.

• An assay that is selected in a library run cannot include library batches that share

one or more samples. However, two different assays in a run can include shared

samples, because assays are run in separate lanes of a chip.

Power the Genexus

™

Integrated Sequencer on or off

Note:

If the Genexus

™

Integrated Sequencer is powered on, and the touchscreen is

blank, touch the screen to "wake" the touchscreen.

If the touchscreen is unresponsive, check the power switch on the back of the

instrument to ensure that the switch is in the on (|) position. If the power switch is in

the off (0) position, proceed with step 1. If the power switch is already in the on

position, proceed to step 2.

Turn the power switch on the back of the instrument to the on (|) position.

Press the power button on the front of the instrument.
The button illuminates. When the instrument touchscreen Main Menu appears,

the instrument is ready for use.

Power on

Chapter 2

Before you begin

Power the Genexus

™

Integrated Sequencer on or off

Genexus

™

Integrated Sequencer User Guide

Содержание Ion Torrent A45727




































































































































































Результаты поиска

Содержание Ion Torrent A45727

Отзывы:

Похожие инструкции для Ion Torrent A45727

Бренды по названию

Популярные бренды

Thermo Scientific Ion Torrent A45727, Руководство пользователя

Результаты поиска

Содержание Ion Torrent A45727

Отзывы:

Похожие инструкции для Ion Torrent A45727

Бренды по названию

Популярные бренды