manualshive.com logo in svg

Thermo Scientific Ion Torrent A45727, Руководство пользователя


Поделиться
Скачать
background image

Environmental design standards

Reference

Description

Directive 2012/19/EU

European Union “WEEE Directive”—Waste electrical and electronic equipment

Directive 2011/65/EU

European Union “RoHS Directive”—Restriction of hazardous substances in electrical

and electronic equipment

SJ/T 11364-2014

“China RoHS” Standard—Marking for the Restricted Use of Hazardous Substances in

Electronic and Electrical Products
For instrument specific certificates, visit our customer resource page at 

www.thermofisher.com/us/en/home/technical-resources/rohs-certificates.html.

Reference

Description

Directive 2014/53/EU

European Union “RE Directive”—Radio equipment

RFID

FCC Notice (for U.S. Customers):
This device complies with Part 15 of the FCC Rules:
Operation is subject to the following conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, Including interference that may

cause undesired operation.
Changes and modifications not expressly approved by Thermo Fisher Scientific can void

your authority to operate this equipment under Federal Communications Commissions

rules.

RFID

Canada (English):
This device complies with Industry Canada licence-exempt RSS standard(s). Operation

is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of the device.

RFID

Canada (Français):
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux

appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions

suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit

accepter tout brouillage adioélectrique subi, même si le brouillage est susceptible d'en

compromettre le fonctionnement.

Radio compliance

standards

Appendix E 

Safety

Safety and electromagnetic compatibility (EMC) standards

E

158

Genexus

™

 Integrated Sequencer User Guide

Содержание Ion Torrent A45727




































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Ion Torrent A45727

ZOLL 330 Operator'S Manual preview
330
Бренд: ZOLL Страницы: 84
Kaivac 2100 Series Operator'S & Parts Manual preview
2100 Series
Бренд: Kaivac Страницы: 29
MacDon 1000 Operator'S & Parts Manual preview
1000
Бренд: MacDon Страницы: 65
B&K DT1 Owner'S Manual preview
DT1
Бренд: B&K Страницы: 8
GE Vivid q N Service Manual preview
Vivid q N
Бренд: GE Страницы: 698
Datalogic Matrix 400 Quick Reference Manual preview
Matrix 400
Бренд: Datalogic Страницы: 20
Datalogic Matrix 320 Product Reference Manual preview
Matrix 320
Бренд: Datalogic Страницы: 188
Konica Minolta DF-619 Service Manual preview
DF-619
Бренд: Konica Minolta Страницы: 32
olympia electronics GR-460/WP Quick Start Manual preview
GR-460/WP
Бренд: olympia electronics Страницы: 2
T-SoX So-exercise TX7 Manual preview
So-exercise TX7
Бренд: T-SoX Страницы: 8
KUHN FC3160TCD Operator'S Manual preview
FC3160TCD
Бренд: KUHN Страницы: 112
Federal Signal Corporation G-SND-024-E Installation And Maintenance Instructions Manual preview
G-SND-024-E
Бренд: Federal Signal Corporation Страницы: 31
Parker TH1E-5 Operating Manual preview
TH1E-5
Бренд: Parker Страницы: 24
Neilsen CT4725 Original Instructions Manual preview
CT4725
Бренд: Neilsen Страницы: 8
GYM form POWER BURN Instruction Manual preview
POWER BURN
Бренд: GYM form Страницы: 40
SHOWTEC Spectral M950 Q4 Tour Manual preview
Spectral M950 Q4 Tour
Бренд: SHOWTEC Страницы: 24
Ibiza 16-2043 Manual preview
16-2043
Бренд: Ibiza Страницы: 20
Musikhaus Kirstein Showlite LDO-10 LED DMX Operator User Manual preview
Showlite LDO-10 LED DMX Operator
Бренд: Musikhaus Kirstein Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды