Thermo Scientific Heracell 150i, Руководство по эксплуатации

Страница: 65 / 156

Operating Instructions | HERAcell® 150i / 240i
65
50115191 A / 08.2009
7 Handling and control (iCan™ touchscreen controller)
7.1 Power switch
Fig. 30: Depending on which side the door hinges are
installed, the power switch [1] is integral to the front
cover [2] of one of the front device stands.
• To turn the device on: Press the power switch [1];
the switch illumination comes on.
– After a short audible signal and a short dark
phase, the touchscreen display appears.
– The control loop sensors pass the heat-up
phase (see chap. 7.4‚ pg. 68)
• To turn the device off: Press the power switch; the
switch illumination goes off
7.2 Operating panel and operating
structure
Fig. 31: The control panel works as a touchscreen
(iCan™ touchscreen) and can be controlled
performing light pressure on the pressure-sensitive
areas of the screen using a finger or a blunt pin:
• Temperature display [1],
• CO
2
display [3],
• O
2
display [5] (optional).
• contra-con key [2]
• menu key [4]
• auto-start key [6],
Extended pressure-sensitive area:
To accept a failure message, the entire
touchscreen can be used as a pressure-
sensitive area.
.
Fig. 30: Power switch
Fig. 31: Pressure-sensitive areas