Thermo Scientific Heracell 150i, Руководство по эксплуатации

Страница: 107 / 156

Operating Instructions | HERAcell® 150i / 240i
9 Cleaning and disinfection 9 Cleaning and disinfection 9 Cleaning and disinfection
107
50115191 A / 08.2009
9.4.1 Activating the contra-con routine
Fig. 66:
The contra-con decontamination routine is
used to decontaminate the complete work space .
1. Press the
CONTRA
-
CON
key [1].
>
The contra-con-instruction menu [2] is
displayed.
2. To exit the contra-con-instruction menu and
contra-con:
>
Press the E
ND
key [4].
>
The system returns to the main menu.
3. To activate contra-con:
>
Press the S
TART
key [3].
>
The contra-con-instruction menu [2] is
displayed.
4. To air the work space, open both device doors
when the audible alarm sounds after 30 seconds.
5. Remove all samples from the work space.
6. Pump the water out of the floorpan and wipe off
water residues.
7. Fill the floorpan of the work space with 350 ml
processed water.
8. Close both device doors.
>
The run of the contra-con decontamination
routine starts.
>
Fig. 67: While the contra-con decontamination
routine is running, the display shows the
current status [5] and outputs the following
information:
– Temperature,
– start time,
– phase,
– remaining run time.
9.4.2 Interrupting contra-con
Fig. 66:
The contra-con decontamination routine can
be interrupted at any time.
1. To interrupt contra-con:
>
Press the S
TOP
key [6].
Fig. 66: Activating contra-con