Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
- 1 -
MiNi 2D Gimbal Firmware Upgrade
Manual
Attention :
The firmware upgrade software only supports the Windows operation
system provisionally.
Please operation step by step strictly and make sure click the “OPEN”
button to open the com port before the USB Mini terminal of the USB cable
connect to the gimbal.
If you want to get the current version of the gimbal, please execute step
3~6.
Please refer to the following connection diagram, connect the USB cable to the
USB connecter before upgrading.
Connection Diagram
1. Download the USB driver from FY-TECH official website and install it.
Then download the dedicated firmware upgrade software
“UPDATE FOR
2AXIS GIMBAL
” and the firmware for the MINI2D gimbal.
2. After successful install the USB driver, please refer to the above
connection diagram, connect the USB cable to the USB connector then insert
the USB connector to the computer. Confirm the port number in device
manager (If the port number is more than COM10, please modify to the
available number which within COM10 ).