Tally XPRESS T9412i, Руководство пользователя

Страница: 43 / 115

Printing on Transparencies 37
USING PRINT MEDIA
P
RINTING ON
T
RANSPARENCIES
Keep the following considerations in mind before you print
on transparencies:
• Create the information you need printed on the
transparencies within your application. Try printing on a
plain sheet of paper first for proper placement.
• You can only print transparencies from Tray 1.
• Load up to 20 transparencies in the Multipurpose Tray
(Tray 1).
• Place transparencies on a flat surface after removing
them from the output tray.
• If transparencies print out cloudy, make sure you have
chosen Transparency in the printer driver rather than
Auto Select.
• Use letter or A4 size transparencies only.
• Transparencies must be able to withstand temperatures
of 392°F (200°C) for at least 0.1 second.
• Keep the paper path clean. Transparencies are especially
sensitive to dirt. If shadows appear on the sheets, clean
the inside of the printer, refer to page 59.
1. Open and extend Tray 1 (A) .
2. Load transparencies (B) . Properly adjust the Width
Guide.
3. Configure the paper source, type, and size within your
software application
(C) .
4. Print to the Main Output Tray (D) . See note below.
Xpress T9412i/T9412n
Do not fan transparencies!
C
B A
D note:
If scratches should occur
on your transparencies, try
printing to the Face-up Output
Tray in back of the printer.