Tally XPRESS T9412i, Руководство пользователя

Страница: 28 / 115

22 Chapter 3, Installing the Software
To remove a printer driver:
1.
Click the Windows Start button and select Programs.
2. Select Tally Xpress T9412c or Tally Xpress T9412i(n).
3. Select Uninstall Tally Xpress T9412 Series Driver or
Tally Xpress T9412i(n)
to start the uninstall process.
note:
If you installed the printer driver using the Add
Printer method, delete the printer’s icon from the Printers
folder.
For the Macintosh
This section describes the hardware and software
requirements for Macintosh computers, and how to install
the printer software.
Software Requirements
For Macintosh computers to connect to the printer, they must
meet three software requirements:
• The operating system must be Mac OS 8.6 or higher.
• The standard Macintosh LaserWriter printer driver must
be installed.
• The Tally Xpress T9412 PPD must be installed.
Hardware Requirements
The hardware required by your Macintosh is based on how
you plan on connecting it to the printer. You can connect the
T9412i(n) directly by using a USB connection, or you can
network it by using an Ethernet connection.
• To directly connect to the printer using USB, your
Macintosh must have a USB port. A USB cable is then
used for connecting the port directly to the printer. The
cable is not supplied with the printer, but is available at
your local computer hardware store.
• To connect through an Ethernet network, your Xpress
T9412i must have been upgraded with the Xpress
Network Upgrade Kit for Macintosh. (The kit contains a
NIC and a PostScript SIMM.) Then use the appropriate
cable to connect the NIC to your network.
Options for the Macintosh
To receive print jobs from a Macintosh computer, the printer
must be upgraded so that it can process the PostScript printer
language, and also be upgraded to use either a LocalTalk or
an Ethernet connection.
For detailed information about the following upgrades, see
Chapter 8, “Printer Options.” For ordering information, see
page 88.
P
OST
S
CRIPT
C
OMPATIBILITY
U
PGRADE
K
IT
(O
RDER
N
O
. 083278)
To send PostScript files to the Xpress T9412i the printer must
be upgraded with the PostScript Level 3 SIMM included in
this kit.
The T9412n model printer already has the PostScript SIMM
installed.
N
ETWORK
I
NTERFACE
U
PGRADE
K
IT FOR
M
ACINTOSH
(O
RDER
N
O
. 083282)
If you plan on connecting your Macintosh to the printer
through a network and you do not have a USB, the Network
Interface Upgrade Kit for Macintosh must be installed in your
printer. The kit includes a NIC and a PostScript SIMM.
The T9412n model printer already has the NIC and
PostScript SIMM installed.
Installing the Macintosh Printer Software
There are three sets of directions for installing the printer
software for the Macintosh: installing over USB, installing
over USB with PostScript, and installing over Ethernet.
Installing the Xpress Printer Software
O
VER
USB
Follow these directions for installing Macintosh printer
software over USB:
1. Insert the Xpress T9412 Series Solutions CD into your
Macintosh.
2. Double-click the Xpress T9412 Series Installer icon to
begin installing the software. Follow the instructions
presented on the screen.
note:
Double-click on the
Videos
folder to see tutorials
on setting up the printer.