Installing the Software
21
INSTALLING THE SOFTWARE
Choosing a Printer Driver
Software for computers running Windows 95, 98, Me, NT, or
2000 is in the form of three printer drivers: the Xpress printer
driver, the PCL6, and the PostScript printer driver. All three
can be installed from the Xpress T9412 Series Solutions CD.
When you select Easy Local Install or Easy Network Install,
the PCL6 driver is automatically installed on your system.
For the T9412n model, the Tally PostScript driver is also
automatically installed. If you want to install these drivers
separately, choose Custom Install
note:
To use the Tally PostScript printer driver a
PostScript SIMM must be installed. Use the Tally
PostScript Compatibility Upgrade Kit (Order No. 1402).
See page 67 for more information.
If you have the T9412n model printer, the PostScript
SIMM is already installed.
Tally recommends using the default Windows driver because
of it’s speed. You can also use the PCL6 driver. If you have
the T9412n model printer or, have installed the PostScript
Compatibility Upgrade Kit in your T9412i printer, you can
use the PostScript driver. Some documents, especially longer
ones may print easier with the PostScript driver. The
PostScript driver is part of the Easy Local Install and Easy
Network Install for the T9412n model. Or you can install it
separately through the Custom Install option on the Xpress
T9412 Series Solutions CD.
You can load more than one driver on your computer. Each
driver will produce a separate icon in your Printers Folder.
For Windows 98 USB Connection
Windows 98 supports USB printing, but you must load the
driver from the Xpress T9412 Series Solutions CD when
prompted by Windows Plug ‘N Play. The USB driver is
located at
x:\USB\Windows98\Tally USB Printer
Port
where
x
is the letter of your CD-ROM drive. You will
also need to go to the driver Properties and select Tally USB
Port Monitor
instead of LPT 1 in the Details tab.
For Windows Me or Windows 2000 USB
Connection
Windows Me and Windows 2000 have USB support already
included in the operating systems.
Using Add Printer
To install the printer drivers through Add Printer follow these
steps: (Press shift key, if needed, to disable auto run when
inserting CD)
1.
From Start, select Settings, then Printers.
2.
In the Printers folder double-click Add Printer.
3.
Follow the Add Printer Wizard. When you are asked to
select the manufacturer and model of your printer, click
Have Disk
.
4.
In the Install From Disk dialog box, navigate to the Plug
‘N Play folder using the following path:
D:\Xpress T9412i (or T9412n)\Windows 9x
(or
other operating system)
\T9412 Series Printer
Driver (
or other driver)
\PlugnPlay
5.
Open the PlugnPlay folder, then click OK. Click OK
again.
6.
Then click Finish and continue following the instructions
on the screen.
Selecting a Default Printer
To select the Xpress T9412i/N as your default printer:
1.
From the Windows Start button, select Settings, then
Printers
.
2.
Highlight and right-click the printer driver icon you
want.
3.
From the drop-down menu, select Set as Default, and a
small check mark will appear by the selected printer
icon.
Removing Printer Software
Use the following method for removing the Xpress software
from computers running Windows 95, 98, Me, or 2000.
Содержание XPRESS T9412i
