Tally XPRESS T9412i, Руководство пользователя

Страница: 78 / 115

72 Chapter 9, Troubleshooting
Paper Out-Manual Feed
The amber Manual Feed LED is blinking.
• Load the correct paper into Tray 1 and press the Go/
Continue button to print each page.
Paper Jam
The Error LED is blinking and the Paper LED is lit. There
is a paper jam somewhere in the printer.
• Clear the paper jam and open and close the Top
Cover. Refer to the paper jam section later in this
chapter.
Paper Size Error
The Error and Paper LED are both blinking.The engine
detects a paper size mismatch between the paper
loaded and the size specified in the driver or application.
• Make sure the paper size and type are specified in
the printer driver.
• Make sure the specified paper is loaded in the tray.
Memory Overflow Error
The Error LED is blinking. The document is too complex,
and the printer does not have enough memory to print
the job.
• Try to free some printer memory by removing any
unnecessary fonts, macros, or any data currently in
printer memory.
• Add more printer memory. See page 66.
• For a temporary solution, simplify the image or print at
a lower resolution.
Mode Message
Cover Open/No Toner Cartridge
The Error LED is on. The printer has a cover open, or
there is no Toner Cartridge.
• Check that the printer Top Cover is closed.
• Make sure that the Toner Cartridge is correctly
installed in the printer.
Internal Error
All four LEDs blink rapidly and sequentially. The printer
detects an internal error.
• Reset the printer by turning the printer off and on.
• If the message persists, contact a service
representative.
Engine Error
All four LEDs blink at the same time. The printer detects
an engine error (LSU or Fuser).
• Reset the printer by turning the printer off and on.
• If the message persists, contact the service
representative.
Mode Message