TC9493VMOI Rev AA 12/08
©2008 Avery Dennison Corporation.
All Rights Reserved.
M O N A R C H
9 4 9 3 ™
V E H I C L E M O U N T I N S T R U C T I O N S
Using the vehicle mount, you can attach your Monarch
Sierra Sport4™
9493
printer to a forklift or other vehicle.
This document describes how to install and use the vehicle mount with the
printer.
I n s t a l l i n g t h e B a t t e r y
The printer has a battery for power; however, it uses the vehicle’s battery to
keep the printer’s battery charged. The input voltage range is 12-72V.
Refer to the printer’s
Operator’s Handbook
available on our Web site
(
www.monarch.com
) for important battery information.
1.
Turn off the printer when you change batteries.
2.
Lay the printer down so the back of the printer faces up.
3.
Remove the plastic from a new battery.
4.
Slide the battery into the battery well in the bottom of the printer until it
latches into place.
Latch
