Suzuki UG110 2021, Руководство по обслуживанию

Страница: 92 / 198

4-16 FUEL AND LUBRICATION SYSTEM
FUEL LEVEL ADJUSTMENT
!
This inspection must be performed in an area well venti-
lated, away from fire or sparks since gasoline, an explo-
sive fluid, is used in this operation.
• Remove the carburetor overflow hose.
• Install the special tool to the carburetor as shown.
2 2
2 2
2
09913-10730: Fuel level gauge
• Adjust the carburetor to the proper angle holding the body with
a vice or the like.
Carburetor set position: Lateral direction : Horizontal
Longitudinal direction : Horizontal
• Fill gasoline in the carburetor.
• Remove air completely from the fuel level gauge.
• With the level gauge held vertical, lower the gauge slowly and
align the datum point
1
with the gauge graduation.
• Wait until the fuel level stabilizes.
• Determine the zero point on the gauge graduation and after
waiting again for level stabilization, measure the height from
the datum point.
4 4 4 4 4
Fuel level: 5.5 – 7.5 mm under from datum point
NOTE:
This specified value is determind by the special tool (09913-
10730).
NOTE:
The apparent fuel level measured in the level gauge is higher
than the actual level in the float chamber because of meniscus
effect. (Meniscus is approximately 1 mm.)
Fuel level
in gauge
Fuel level
in float
Datum
point