Suzuki UG110 2021, Руководство по обслуживанию

Страница: 153 / 198

6-12 ELECTRICAL SYSTEM
COMMUTATOR
Inspect the commutator for discoloration, abnormal wear, or un-
dercut
A
.
If any damages are found, replace the armature with a new one.
If the commutator surface is discolored, polish it with #400 sand-
paper and wipe it using a clean, dry cloth.
If there is no undercut, scrape out the insulator
1
with a saw
blade.
ARMATURE COIL
Check for continuity between each segment.
Check for continuity between each segment and the armature
shaft.
If there is no continuity between the segments or there is conti-
nuity between the segments and shaft, replace the armature with
a new one.
#
09900-25008: Multi circuit tester set
,
Tester knob indication: Continuity test (
-
)
STARTER MOTOR REASSEMBLY
Reassemble the starter motor in the reverse order of disassem-
bly. Pay attention to the following points:
"
Replace the O-rings with new ones to prevent oil leak-
age and moisture.
• Apply SUZUKI SUPER GREASE “A” to the lip of the oil seal.
. .
. . .
99000-25010: SUZUKI SUPER GREASE “A”
-
OIL SEAL INSPECTION
Check the seal lip for damage or leakage.
If any damage is found, replace the bracket with a new one.