Suzuki UG110 2021, Руководство по обслуживанию

Страница: 62 / 198

ENGINE 3-33
LEFT CRANKSHAFT BEARING
• Remove the crankshaft oil seals. (
7
3-34)
• Remove the left crankshaft bearing using the special tool.
2
09921-20220: Bearing remover set (
φφφφφ
30 mm)
5
Replace the removed bearing with a new one.
• Install the left crankshaft bearing using the special tool.
2
09913-70210: Bearing installer set (
φφφφφ
55 mm)
OIL SEALS
Damage to the lip of the oil seal may result in leakage of the fuel-
air mixture or gear oil. Inspect the oil seal and if it is damaged,
replace it with a new one.
• Install the oil seals into the crankcases and gear box cover, as
shown below.
5
Replace the removed oil seals with new ones.
• Apply SUZUKI SUPER GREASE “A” to the lip of the oil seals.
$
99000-25010: SUZUKI SUPER GREASE “A”
REAR AXLE SHAFT OIL SEAL
• Remove the right rear axle shaft bearing. (
7
3-30)
• Remove the rear axle shaft oil seal
1
from the gear box cover
using the special tool.
2
09913-50121: Oil seal remover
5
Replace the removed oil seal with a new one.