Suzuki UG110 2021, Руководство по обслуживанию

Страница: 9 / 198

GENERAL INFORMATION 1-5
FINAL GEAR OIL
Use a good quality SAE 10W/40 multi-grade motor oil.
BRAKE FLUID
, ,
, ,
,
Specification and classification: DOT 4
!
* This motorcycle uses a glycol-based brake fluid. Do not use or mix different types of brake
fluid such as silicone-based and petroleum-based fluids for refilling the system, otherwise
serious damage will result to the brake system.
* Never use any brake fluid taken from old, used, or unsealed containers.
* Never reuse brake fluid left over from a last servicing or which has been stored for a long
period of time.
FRONT FORK OIL
Use SUZUKI FORK OIL G10 (#10) or an equivalent fork oil.
BREAK-IN PROCEDURES
During manufacturing only the best possible materials are used and all machined parts are finished to a
very high standard. It is still necessary to allow the moving parts to “BREAK-IN” before subjecting the engine
to maximum stresses. The future performance and reliability of the engine depends on the care and restraint
exercised during its early life. Refer to the following throttle position recommendations.
• Keep to these break-in throttle positions.
Initial 800 km (500 miles) : Less than 1/2 throttle
Up to 1 600 km (1 000 miles) : Less than 3/4 throttle
• Upon reaching an odometer reading of 1 600 km you can subject the motorcycle to full throttle operation
for short periods of time.
ENGINE OIL
Use only SUZUKI CCI SUPER OIL or an equivalent premium
quality 2-stroke synthetic engine oil. Use only oils which are rated
FC under the JASO classification.
1
Engine oil tank cap