Suzuki UG110 2021, Руководство по обслуживанию

Страница: 53 / 198

3-24 ENGINE
• Apply SUZUKI SUPER GREASE “A” between the sliding sur-
face of the fixed driven face and movable driven face.
$
99000-25010: SUZUKI SUPER GREASE “A”
NOTE:
When installing the movable face to the fixed face, make sure the
oil seal is positioned properly.
• Install the pins
1
at three places on the drive face hub.
• Apply much SUZUKI SUPER GREASE “A” to the cam where
the pins are placed and surface of the driven face as shown.
$
99000-25010: SUZUKI SUPER GREASE “A”
• Position the new two O-rings
2
.
NOTE:
Clean and free of any grease after installing the driven face spring
guide.
• Tighten the clutch shoe nut to the specified torque using the
special tool.
2
09930-40113: Rotor holder
"
Clutch shoe nut: 50 N.m (5.0 kgf.m)
• Install the needle roller bearing using the special tool.
2
09924-84521: Bearing installer
NOTE:
Face the stamped side of the needle roller bearing out.