Suzuki UG110 2021, Руководство по обслуживанию

Страница: 194 / 198

7-22 SERVICING INFORMATION
CARBURETOR
ITEM SPECIFICATION
Carburetor type MIKUNI VM18SH
Bore size 18 mm
I.D. No. 16F1
Idle r/min. 1 800 ± 200 r/min
Float height 9.5 ± 0.5 mm
Main jet (M.J.) #75
Jet needle (J.N.) 3DR8-3rd
Needle jet (N.J.) E-2
Pilot jet (P.J.) #15
Air screw (A.S.) 1¼ turns back
Throttle cable play 2 – 4 mm
BRAKE + WHEEL
Unit: mm
ITEM STANDARD/SPECIFICATION LIMIT
Brake lever play Rear 15 – 25 ———
Brake drum I.D. Rear ——— 110.7
Brake disc thickness Front 4.0 ± 0.2 3.5
Brake disc runout Front ——— 0.30
Master cylinder bore Front 11.000 – 11.043 ———
Master cylinder piston diam. Front 10.957 – 10.984 ———
Brake caliper cylinder bore Front 30.230 – 30.306 ———
Brake caliper piston diam. Front 30.150 – 30.200 ———
Brake fluid type DOT 4 ———
Wheel rim runout Axial ——— 2.0
Radial ——— 2.0
Wheel axle runout Front ——— 0.25
Wheel rim size Front 12 × MT2.50 ———
Rear 12 × MT2.50 ———
TIRE
ITEM STANDARD/SPECIFICATION LIMIT
COLD INFLATION TIRE Front 150 kPa (1.50 kgf/cm 2 ) ———
PRESSURE (SOLO RIDING)
Rear 200 kPa (2.00 kgf/cm
2
) ———
COLD INFLATION TIRE Front 150 kPa (1.50 kgf/cm 2 ) ———
PRESSURE (DUAL RIDING)
Rear 250 kPa (2.50 kgf/cm 2 ) ———
Tire size Front 90/90-12 44J ———
Rear 100/80-12 56J ———
Tire type Front BRIDGESTONE: HOOP B01 ———
Rear BRIDGESTONE: HOOP B01 ———
Tire tread depth Front ——— 1.6mm
Rear ——— 1.6mm