Suzuki UG110 2021, Руководство по обслуживанию

Страница: 40 / 198

ENGINE 3-11
• Place a clean rag over the cylinder base to prevent the piston
pin circlip from dropping into the crankcase. Then, remove the
piston pin circlip with long-nose pliers.
• Remove the piston pin, piston and piston pin bearing.
• Remove the starter motor
1
.
• Remove the starter pinion gear assembly
2
.
• Remove the kick starter nut
3
while holding the kick starter
with a 32-mm offset wrench as shown.
• Remove the wave washer
4
and kick starter
5
.
• Remove the washer
6
, fan
7
and starter driven gear
8
.
• Remove the fixed drive face
9
.