Suzuki UG110 2021, Руководство по обслуживанию

Страница: 118 / 198

5-22 CHASSIS
PISTON
Inspect the piston surface for any scratches or other damage. If
any damages are found, replace the piston with a new one.
RUBBER PARTS
Inspect the primary cup, secondary cup and dust seal for wear or
damage. If any damages are found, replace the primary cup, sec-
ondary cup, and dust seal with new ones.
MASTER CYLINDER REASSEMBLY AND
REMOUNTING
Reassemble and remount the master cylinder in the reverse or-
der of removal and disassembly. Pay attention to the following
points:
5
* Wash the master cylinder components with new brake
fluid before reassembly.
* Do not wipe the brake fluid off after washing the com-
ponents.
* When washing the components, use the specified
brake fluid. Never use different types of fluid or clean-
ing solvents such as gasoline, kerosine, etc.
* Apply brake fluid to the master cylinder bore and all of
the master cylinder components before reassembly.
,
Specification and classification: DOT 4
NOTE:
When installing the circlip, make sure that the sharp edge of the
circlip faces outside.
• When reinstalling the brake light switch
1
, align the projection
on the switch with the hole in the master cylinder.
• When remounting the master cylinder onto the handlebars,
align the master cylinder holder’s mating surface
A
with punch
mark
B
on the handlebars.