Stratasys P750K, Руководство пользователя

Страница: 163 / 196

DOC08010 Rev. A (DRAFT 1)
6–47
Stratasys P750K User Guide
13. Pull ȱ the ȱ print Ȭ head ȱ driver ȱ card ȱ out ȱ of ȱ its ȱ socket ȱ so ȱ that ȱ the ȱ head ȱ is ȱ free ȱ
(A) ȱ and ȱ remove ȱ it ȱ from ȱ the ȱ bottom ȱ of ȱ the ȱ print ȱ block ȱ (B).
Figure 6-69: Releasing the print-head driver card to remove the head
14. Make ȱ sure ȱ that ȱ along ȱ with ȱ the ȱ head, ȱ you ȱ remove ȱ the ȱ two ȱ rubber ȱ O Ȭ ring ȱ
seals.
Figure 6-70: O-ring seals on the print head
Figure 6-71: Making sure the O-rings are not stuck to the print block
Important : If the seals are not removed with the head, they are probably
stuck to the print block housing. If so, remove them.