Stratasys P750K, Руководство пользователя

Страница: 149 / 196

DOC08010 Rev. A (DRAFT 1)
6–33
Stratasys P750K User Guide
8. When ȱ the ȱ following ȱ screen ȱ appears, ȱ remove ȱ the ȱ transparency.
Figure 6-42:
Head Alignment wizard—steps 8–10
The ȱ transparency ȱ sheet ȱ is ȱ printed ȱ with ȱ sets ȱ of ȱ vertical ȱ lines ȱ in ȱ seven ȱ
columns, ȱ each ȱ showing ȱ the ȱ results ȱ from ȱ a ȱ different ȱ print ȱ head.
Figure 6-43: Sample head-alignment test
Note: There is no column for head H7 because its alignment is used as a
reference for aligning all other heads.
9. For ȱ each ȱ column ȱ of ȱ lines, ȱ use ȱ a ȱ magnifying ȱ glass ȱ or ȱ loupe ȱ to ȱ inspect ȱ
pairs ȱ of ȱ consecutive ȱ rows ȱ printed ȱ on ȱ the ȱ transparency ȱ to ȱ see ȱ where ȱ the ȱ
vertical ȱ lines ȱ align.
Figure 6-44: Comparing rows of alignment lines
Note: It does not matter which pair of lines you inspect, since they were all
printed by the same head. Choose a pair of clearly printed lines for the
inspection. (Since some nozzles may not print clearly, you may have to
inspect several pairs of lines to properly view the alignment.)