Stratasys P750K, Руководство пользователя

Страница: 128 / 196

Operating & Maintaining the Stratasys P750K 3D Printer
6–12
DOC08010 Rev. A (DRAFT 1)
3. If ȱ the ȱ printer ȱ cover ȱ is ȱ not ȱ closed, ȱ a ȱ screen ȱ appears, ȱ prompting ȱ you ȱ to ȱ
close ȱ the ȱ cover. ȱ Confirm ȱ that ȱ it ȱ is ȱ closed ȱ and ȱ click ȱ
Next
.
4. Choose ȱ the ȱ configuration ȱ for ȱ producing ȱ models: ȱ
•
6 ȱ materials
•
3 ȱ materials
5. In ȱ the ȱ Required ȱ materials ȱ section ȱ of ȱ the ȱ wizard ȱ screen, ȱ select ȱ one ȱ or ȱ more ȱ
replacement ȱ materials.
6. Select ȱ
Both cartridges
ȱ if ȱ you ȱ need ȱ to ȱ load ȱ two ȱ replacement ȱ cartridges.
Loading ȱ one ȱ replacement ȱ cartridge ȱ is ȱ more ȱ economical ȱ because ȱ it ȱ
potentially ȱ requires ȱ less ȱ flushing ȱ of ȱ material ȱ currently ȱ in ȱ the ȱ system. ȱ
However, ȱ when ȱ one ȱ cartridge ȱ is ȱ not ȱ sufficient, ȱ loading ȱ two ȱ cartridges ȱ
enables ȱ continuous ȱ printing ȱ until ȱ the ȱ print ȱ job ȱ is ȱ completed. ȱ When ȱ one ȱ
cartridge ȱ empties ȱ and ȱ the ȱ other ȱ one ȱ is ȱ being ȱ used, ȱ you ȱ can ȱ replace ȱ the ȱ
empty ȱ cartridge ȱ with ȱ a ȱ new ȱ one.
¾
6 materials
Each ȱ of ȱ the ȱ Model ȱ materials ȱ is ȱ loaded ȱ into ȱ a ȱ separate ȱ chamber ȱ in ȱ the ȱ
print ȱ heads.
ˆ You ȱ can ȱ print ȱ with ȱ any ȱ of ȱ the ȱ loaded ȱ materials ȱ without ȱ the ȱ need ȱ to ȱ
run ȱ the ȱ wizard.
¾
3 materials
Two ȱ chambers ȱ in ȱ each ȱ of ȱ the ȱ three ȱ Model ȱ print ȱ heads ȱ are ȱ used ȱ for ȱ each ȱ
Model ȱ material.
ˆ
This ȱ mode ȱ is ȱ required ȱ to ȱ produce ȱ build ȱ trays ȱ at ȱ high ȱ speed, ȱ using ȱ up ȱ
to ȱ three ȱ Model ȱ materials.