Stratasys P750K, Руководство пользователя

Страница: 154 / 196

Operating & Maintaining the Stratasys P750K 3D Printer
6–38
DOC08010 Rev. A (DRAFT 1)
8. When ȱ the ȱ following ȱ screen ȱ appears, ȱ tape ȱ a ȱ sheet ȱ of ȱ pink ȱ paper ȱ to ȱ the ȱ
surface ȱ left ȱ of ȱ the ȱ build ȱ tray, ȱ close ȱ the ȱ cover ȱ and ȱ click ȱ
Next
.
Figure 6-52: Preparations confirmation
The ȱ printer ȱ prints ȱ a ȱ frame ȱ on ȱ the ȱ build ȱ tray ȱ and ȱ then ȱ prints ȱ the ȱ Pattern ȱ
Test.
9. When ȱ the ȱ Pattern ȱ Test ȱ is ȱ printed, ȱ carefully ȱ inspect ȱ it, ȱ using ȱ the ȱ Missing ȱ
Nozzles ȱ Ruler ȱ to ȱ see ȱ if ȱ there ȱ are ȱ missing ȱ lines.
Figure 6-53: Inspecting the Pattern Test
Each ȱ missing ȱ line ȱ represents ȱ a ȱ faulty ȱ nozzle ȱ in ȱ the ȱ print ȱ head.
10. In ȱ the ȱ following ȱ wizard ȱ screen, ȱ enter ȱ the ȱ number ȱ of ȱ missing ȱ nozzles ȱ
for ȱ each ȱ print ȱ head ȱ and ȱ click ȱ
Next
.
Figure 6-54: Enter Missing Nozzles screen