51
Nynja Build Manual 1.4d
g) The stick pivot fork end should be fitted through the plastic torque-tube
bearing and into the torque-tube.
Note that the plastic bearing fits over the fork end and is trapped in
position by the torque-tube. This should be an easy fit with 0.5mm free
play along the axis of the torque-tube. If this is tight it may be necessary
to file the end of the torque-tube a little to prevent binding.
If the bearing is tight on the stick pivot piece when positioned correctly,
the bearing should be abraded lightly until a smooth action is achieved.
h) The torque-tube can now be fitted onto the front pivot (attached to the aileron
horn), and the rear pivot can be bolted to the central cabin tubes
SKR19
.
Note that the rudder stop cables will be fitted between the rear pivot
support and the central cabin tubes, do not tighten these bolts up
without the stops in place.
It may be necessary to slot the holes horizontally in the rear pivot where
it attaches to the central cabin tubes
SKR19
to allow it to take up the
exact alignment of the torque-tube, but note the rudder stop cables will
have some effect on this alignment.
i) Insert and secure the bolts holding the fittings into the ends of the torque-tube.
Содержание Nynja
