110
Nynja Build Manual 1.4d
8. Wings
The wings are built at this stage to allow them to be fitted to the fuselage to permit
accurate positioning of the parts supporting the windscreen.
Remember to make a handed pair of wings!
8.1 Wing Frame
Figure 130 overview of wing structure. Ignore the cable numbers.
a) Set the leading edge tube
SKR49
and the trailing edge tube
SKR50
across
two supports at a comfortable working height, or lay a piece of carpet or
similar on the floor to work on.
b) Assemble the fittings onto the tubes as per the following drawings in this
section. Tighten the fittings except for the aileron eyebolts (the outer 3
eyebolts) as per the rest of this section.
Important: Do not over-tighten the bolts, and remember the
Loctite!
You should not be able to see any deformation of the tubes
when you have finished tightening the bolts. If you can see any oval ling
of the tubes, you have tightened them too much.
The saddle washers shown in Figure 141 over which the tensioning
tube fits often foul the edge of the rear spar attachment bracket on the
fuselage. It is worth filing 2-3mm off the side closest to the wing root
before the saddle washer is fitted to the spar.
Содержание Nynja
