Skyranger Nynja, Руководство по сборке

Страница: 211 / 278

211
Nynja Build manual 1.4d
18.2.3 Fittings
a) Fit the lower catch assemblies as per Figure 254.
It should be positioned so that the 6mm hole is drilled in the centre of
the lower horizontal part of the door frame. Use two 4mm steel rivets to
attach the aluminium plate to the doorframe.
Figure 287 lower catch.
b) The inner edge of the sill should be positioned so the latch it a tight fit to lock
into place.
The fibreglass can be filed a little to achieve a slight indent to prevent
the lever from inadvertently rotating to the open position, or an
aluminium piece can be riveted on to protect the fibreglass from wear.
c) Position the front catch just above the gusset plate for the forwards edge of
the centre cross piece.
UKMOD: this is an additional catch for UK aircraft to secure the front of
the doorframe to the cabin uprights
tu34 .
It should be fitted with the bolt tightened to ensure enough friction to
prevent inadvertent rotation. A convenient hole in
tu34 can be used as
a detent, or one drilled for the purpose.
Figure 288 front catch.