Skyranger Nynja, Руководство по сборке

Страница: 126 / 278

126
Nynja Build Manual 1.4d
8.5 Flaps
a) Remove the horns on the flap roots.
b) Fit the longer Nynja items.
These fit on the other side of the tube. Cut a slot in the fabric to
facilitate them.
Fig 152 Nynja Flap horns
c) Temporarily mount the flaps on the wings.
If the pin securing the wing trailing edge to the fuselage touches the
leading edge tube of the flap, the pin should be shortened to fit.
The control rod mounting plates at the flap roots face downwards.
d) Attach the push rods for the flaps to the flap handle,.
The slightly longer flap pushrod and the longer spacer tube goes on the
starboard side of the rear end of the flap handle.
e) Attach the push rods from the flap handle to the plates on the flap roots.
The plates may require a tweak to line them up with the pushrods.
f) If the flap lever rubs the cables, check the fitment of the flap lever and
adjustment of the cables against the respective instructions.
If the starboard flap pushrod still rubs the control cables (due to the
UKMOD controls) cut a few mm length off the port side spacer tube and
add it to the starboard side spacer tube.
g) Check the smooth operation of the flaps, including moving the ailerons to
check for any contact between them.