209
Nynja Build manual 1.4d
e) Fit the piano hinge now to the 20x20 angle trimming its length as necessary.
f) Take the door frame and offer it up to the opening.
Aim for a final position with an even spacing from the cabin uprights
TU34 and the top of the door sill and rear upright TU6
Carefully bend the frame as required to ensure the best fit.
The relative positions of the rear cabin uprights
tu6
and the cabin
uprights
tu34
requires that the rear edge is also bent outwards slightly
relative to the front.
g) Mark the tops of the door frames and cut, just below the hinge line. Drill the
hinge and door tubes with 4mm holes and secure with cleco’s/ skinpin’s.
h) Fit the central curved tube.
The curve should go towards the rear of the door
– like a backwards
aerofoil. Check the curve with a straight edge
– max camber should be
50mm.
Fig 285
– door curve
It should be positioned with the rear edge just above the bend in the door
frame, and the front edge positioned so the tube is horizontal or nearly so
matching the lines and overall shape of the aircraft. If it needs trimming
– trim
from the front edge.
Fit in position using the gusset plates shown in drawing Fig 285 and 286, with
4mm aluminium rivets.
Fig 286 front and rear gusset plates
i) Do a final check of fit and operation of the doorframe.
Front
Rear
50mm
Содержание Nynja
