2-12
16
Enter the remaining length of media.
Enter the remaining length of roll media
loaded to the printer.
(
P.3-18 [MEDIA MENU]
)
17
The media set operation automatically
starts.
-
When finished, the printer returns to the state of online state or offline state,
if no error occurs.
-
If an error occurs, the error message is displayed.
Go back to step
1
and start with the beginning again.
Note
-
After installing the media, beware that the media does not enter in the gap of
Media cutter blade or is not pinched by the media clip. Also ensure the media on
the platen has no curl or wrinkles.
To register a new media
15
Select the type of media.
Select the type of media registered
with the
and
keys and press
the
key. (
P.3-20 [MEDIA
REG MENU]
)
REMAINING MEDIA
*
XXXm
PREPARING MEDIA
PLEASE WAIT
[NEW MEDIA ENTRY] is displayed at the
end of the registered media.
Press the
key to enter [MEDIA REG
MENU].
The media registration procedure is the
same as the registration from the registration
menu. (
P.3-20 [MEDIA REG MENU]
)
Press “
” key to return from the media
registration menu to the media type
selection menu.
To return to the value before input, press the
key.
MEDIA:XXX
SELEC T MEDIA
MEDIA:PAPER
SELEC T MEDIA
NEW MEDIA ENTRY
The registered media is displayed.
(Enter in the registration
menu.)
MEDIA:XXX
SELEC T MEDIA
MEDIA:PAPER
IP-5610取説_E.indb 12
09.4.3 3:13:53 PM
