Siemens HydroRanger 200, Инструкция по эксплуатации

Страница: 31 / 280

7ML19985FC03 HydroRanger 200 – INSTRUCTION MANUAL Page 21
m
mmmm
Oper
a
tion
Operating the HydroRanger 200
The HydroRanger 200 has two modes of operation: RUN and PROGRAM.
RUN Mode
In RUN mode, the HydroRanger 200 detects material level and provides control functions.
The HydroRanger 200 automatically starts in RUN mode when power is applied.
System status is shown on the unit’s LCD, or on a remote communications terminal.
Display
Indicator Functions
RUN Mode PROGRAM Mode
1 index type (see below) index type (see next table)
2 index index
3 primary reading parameter value
4 units units
5 hi and hi hi alarm designation auxiliary function
6 level display n/a
7 filling display scroll access tag
8 emptying display scroll access tag
9 lo and lo lo alarm designation n/a
10 relay # programmed relay # programmed
11 relay # activated relay # activated
12 auxiliary reading parameter number
13 normal operation: n/a
14 failsafe operation: n/a
1 2 3 4 6 5
?
1 2
3 4
5
6
7
8
9
10 11 12
13
14