Siemens HydroRanger 200, Инструкция по эксплуатации

Страница: 34 / 280

Page 24 HydroRanger 200 – INSTRUCTION MANUAL 7ML19985FC03
mmmmm
Ope
rat
ion
Controlling the Display
RUN mode provides numerous parameters and variables that you can track on the
display (see
Display
on page 21).
The LCD displays
EEEE
if a value is too long.
Adjusting the primary reading for four-digit LCD readout:
Example
To reference the displayed level to sea level, enter the distance in Units (P005), between
Empty (P006) and sea level. (Enter a negative value if Empty is below sea level.)
P062 is the distance between sea level and Empty.
Auxiliary Reading
The Auxiliary Reading area of the LCD displays parameter values while leaving the
primary reading on screen.
Parameter Action
P060 Decimal Position Sets maximum number of decimals
P061 Convert Reading Scales the reading to fit
P062 Offset Reading Shifts the reading up or down by a fixed amount
Note:
The parameters shown in the auxiliary reading field are indexed as follows:
• global
• by transducer
• by level
P007
P006
Reservoir
P062
Sea Level