manualshive.com logo in svg

Siemens 353, Руководство пользователя

Пользовательский мануал для продукта Siemens 353 доступен для бесплатного скачивания на нашем сайте. Этот руководство поможет вам получить максимум от вашего устройства. Посетите {ссылка} скачать руководство пользователя прямо сейчас!

Поделиться
Скачать
background image

UM353-1B 

Function Blocks 

April 2012 

 

 

3-1

3.0  FUNCTION BLOCKS 

This section contains a detailed description of each function block (FB) available for configuration.  Each function 
block description is supplemented by: (1) a drawing of the block showing data inputs and outputs and control lines, 
(2) a block parameter table.  Most blocks are further described by a block diagram that shows the block’s circuitry 
in a simplified or equivalent circuit form. 

NOTES 

This User’s Manual includes the functionality provided by MPU Controller Board 
Design Level “B” and firmware Version 4.0. 

Keep your controller firmware current by subscribing to updates. The latest firmware 
version will often provide performance options (e.g. additional function blocks, 
parameter selections) not available in an earlier version. 

Function blocks have three types of inputs/outputs: digital, analog, and special data structure. 

1.

 

Arrows with dark shading and white letters are digital (outputs are displayed as 0 and 1 in the VIEW mode 
when using the local faceplate). Digital outputs are typically used to designate function block status, logical 
outputs, and on/off function block outputs. Some examples are: 

•

 

Function block status: E/I status (IS, ES, SI), A/M status (AS, NA, MS, ES, SS), and Quality Status (QS) 

•

 

Logical Outputs: AND (01), OR (01), NOR (01), or NOT (01) 

•

 

On/Off function blocks: One Shot Timer (01), Retentive On Timer (01), Rising Edge Trigger (01), Alarms 
(A1, A2, A3, and A4), and Comparator (01) 

2.

 

Arrows with medium shading and black letters are analog.  Internally they are REAL floating point numbers 
and outputs of these types will be displayed in the VIEW mode when using the local faceplate with the decimal 
point located to allow greatest resolution between 0.00000 and 999999 or -0.0000 and -99999.  Numbers 
outside this resolution will blink. 
 
Analog outputs are typically output (01) for analog I/O blocks and math functions. Analog outputs may also be 
specific to a particular function block such as the Analog Output (AO), Step Number (SN), Step Time (ST), 
Remaining Time (RT), and Current Recipe (CR) outputs of the Program Sequencer. 

3.

 

Arrows with medium shading and black letters but with a white tip are special data structures for range scaling 
information and will not be displayed in the VIEW mode). Range scaling information is used when there is a 
conversion of units within a function block, for example, the Alarm block scales the alarm limits into process 
engineering units when the range pointer is configured to the process analog input block.  If unconfigured the 
units default to 0-100%.  The output range (OR), typically used on analog input function blocks, includes MIN 
and MAX SCALE, the DPP (Decimal Point Position), and the ENGUNITS (Engineering Units).  
 
The output range is connected to the Range Pointer (input R) of functions blocks requiring scaling other than 
the default 0-100.  For example, an Analog input block could be scaled 0-5000 psig with output (01) connected 
to the AOUT input (S) and the AIN (OR) connected to the AOUT input (R).  The Analog output would then 
output 4 mA at a minscale of 0 psig and 20 mA at a maxscale of 5000 psig.  In contrast, if AOUT input (R) 
were left unconfigured the output would equal 4 mA at a minscale of 0 psig, 20 mA at a maxscale of 100 psig 
and over ranged for any input over 100 psig. 
 
Some users may prefer to use normalized 0-1 analog inputs for math calculations and scale outputs for display 
only; in this case, the Scaler function block may be used to provide an output range (OR) for the ODC 
(Operator display block). 

 

Note how the range pointers are used in the following Factory Configured Options (FCOs). FCOs are described 
in detail in Section 4 Factory Configured Options. 

•

 

FCO101 Single Loop Controller – The process output range AIN1 (OR) is connected to the range pointer 
of the SETPT block, the PID block, the ALARM block and the process variable range of the ODC block. 
As a result these blocks will be automatically rescaled when the minscale and the maxscale or the 

Содержание 353























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 353

ABB FPBA-01 PROFIBUS DP Quick Installation And Start-Up Manual preview
FPBA-01 PROFIBUS DP
Бренд: ABB Страницы: 2
ABB ControlMaster CM15 Instructions preview
ControlMaster CM15
Бренд: ABB Страницы: 4
fakro ZWMA Programming And Usage Instructions preview
ZWMA
Бренд: fakro Страницы: 16
e-BLEACH infinity User Manual preview
infinity
Бренд: e-BLEACH Страницы: 24
H3C S9500E Series Card Manual preview
S9500E Series
Бренд: H3C Страницы: 5
H3C WX1800H series Command Reference Manual preview
WX1800H series
Бренд: H3C Страницы: 27
H3C WX3500H series Installations preview
WX3500H series
Бренд: H3C Страницы: 4
H3C WX5540H Installation Manual preview
WX5540H
Бренд: H3C Страницы: 54
H3C LSWM1WCM10 Manual preview
LSWM1WCM10
Бренд: H3C Страницы: 10
H3C LSQM1WCMB0 Quick Start Manual preview
LSQM1WCMB0
Бренд: H3C Страницы: 10
Xilinx ZC702 Getting Started Manual preview
ZC702
Бренд: Xilinx Страницы: 52
Zeta Premier MX-16 Installation And Commissioning Manual preview
Premier MX-16
Бренд: Zeta Страницы: 44
OPW PetroVend PV200 Options Installation preview
PetroVend PV200
Бренд: OPW Страницы: 2
Dakota Digital BIM-01-2-FTCH Manual preview
BIM-01-2-FTCH
Бренд: Dakota Digital Страницы: 12
NEC uPD78F4225Y Manual preview
uPD78F4225Y
Бренд: NEC Страницы: 30
Gemini GTL5W Instruction Manual preview
GTL5W
Бренд: Gemini Страницы: 9
M-system R7EWTU Instruction Manual preview
R7EWTU
Бренд: M-system Страницы: 18
W.E.ST. SCU-138-P Technical Documentation Manual preview
SCU-138-P
Бренд: W.E.ST. Страницы: 34

Бренды по названию

Популярные бренды

Загрузить еще бренды