Sharp MX-C311 Скачать руководство пользователя страница 845 | Manualshive

Страница: 845 / 849

Sharp MX-C311 Скачать руководство пользователя страница 845

8-36

TROUBLESHOOTING

Smudges appear on
printed output.

Are you using paper that is not within
the specifications?

Use SHARP-recommended paper. Using paper that is
for other models or special paper that is not supported
may result in misfeeds, creases, or smudges.

☞

"SUPPLIES" in the Maintenance & Safety Guide

Are you printing on pre-punched paper?

If the printed image overlaps the punch holes, smudges
may appear on the reverse side of the paper following
one-sided printing, or on both sides following two-sided
printing. Take care that the image does not overlap the
punch holes.

Does a message appear indicating the
need for maintenance?

Contact your dealer or nearest SHARP Service
Department as soon as possible.

Toner does not adhere
well or creases appear
in the paper.

Are you using paper that is not within
the specifications?

Use SHARP-recommended paper. Using paper that is
for other models or special paper that is not supported
may result in misfeeds, creases, or smudges.

☞

"SUPPLIES" in the Maintenance & Safety Guide

Did you set the correct paper type?

Set the correct paper type in the tray settings. Make
sure that the following has not occurred:

• Heavy paper is being used, but a paper type other

than heavy paper is selected in the tray settings. (The
image may disappear if rubbed.)

• Paper other than heavy paper is being used, but

heavy paper is selected in the tray settings. (This may
cause creases and misfeeds.)

➞

System Settings > "Paper Tray Settings" > "Tray
Settings"

Is the paper loaded so that printing
takes place on the reverse side?

If printing takes place on the wrong side of label sheets
or transparency film, the toner may not adhere well and
a clear image may not be obtained.

Print quality is poor.

Is "Toner Save Mode" enabled?

When "Toner Save Mode" is enabled, printing takes
place using less toner and thus the print result is lighter.
Check with your administrator.

Part of the image is
cut off.

Has the correct paper size been set?

If you are using a special size, be sure to specify the
paper size.
If the size of paper loaded in a tray was changed, be
sure to check the paper size setting.

➞

System Settings > "Paper Tray Settings" > "Tray
Settings"

Was the original placed in the correct
position?

If you are using the document glass, be sure to place
the original in the left center of the document glass.

☞

1. BEFORE USING THE MACHINE "

THE ORIGINAL ON THE DOCUMENT GLASS

"

(page 1-36)

Problem

Point to check

Solution

«
...
843
844
845
846
847
...
»

Содержание MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов