Sharp MX-C311 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 849

Sharp MX-C311 Скачать руководство пользователя страница 12

9

SUPPLIES

Standard supplies for this product that can be replaced by the user include
paper, toner cartridges, and staple cartridges for the finisher.
Be sure to use only SHARP-specified products for the toner cartridges, finisher
staple cartridge, and transparency film.

Storage of supplies

Proper storage

1. Store the supplies in a location that is:

• clean and dry
• at normal temperature with minimal temperature fluctuations
• not exposed to direct sunlight

2. Store paper in the wrapper and lying flat.
3. Paper stored in packages standing up or out of the wrapper may curl or

become damp, resulting in paper misfeeds.

Storing toner cartridges

Store the box that contains the toner cartridge horizontally; do not store it
standing up. If the toner cartridge is stored standing up, the toner may solidify
inside the cartridge.
Store the toner in a location that is cooler than 104°F (40°C). Storage in a hot
location may cause the toner in the cartridge to solidify.

Staple cartridge

The finisher requires the following staple cartridge:

MX-SCX1 (for finisher)
Approx. 5000 per cartridge x 3 cartridges

Supply of spare parts and consumables

The supply of spare parts for repair of the machine is guaranteed for at least 7
years following the termination of production. Spare parts are those parts of the
machine which may break down within the scope of the ordinary use of the
product, whereas those parts which normally exceed the life of the product are
not to be considered as spare parts. Consumables too, are available for 7 years
following the termination of production.

For best copying results, be sure to use only Sharp Genuine
Supplies which are designed, engineered, and tested to
maximize the life and performance of Sharp products. Look for
the Genuine Supplies label on the toner package.

GENUINE SUPPLIES

mxc401_us_saf.book 9 ページ２００８年１０月１５日　水曜日　午前１１時５２分

«
...
10
11
12
13
14
...
»

Содержание MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов