Sharp MX-C311, Руководство по эксплуатации, Страница: 262 / 849

2-26
COPIER
Contents
MANUAL RATIO SELECTION (Preset ratios/Zoom)
Touch the [Copy Ratio] key in the base screen of copy mode to select one of three preset enlargement ratios or two
preset reduction ratios (maximum 200%, minimum 50%).
In addition, the zoom keys can be used to select any ratio from 50% to 200% in increments of 1%.
1
Set the ratio.
Touch a preset ratio key and/or the zoom keys to set the ratio.
There are two setting screens. Use the
keys to switch
between the screens.
●
1st screen
• Enlargement keys (1 ratio): 129%
• Reduction keys (2 ratios): 64% and 77%
• [100%] key
●
2nd screen
• Enlargement keys (1 to 3 ratios)
200%, any ratio (max. of two)
• Reduction keys (1 to 3 ratios)
50%, any ratio (max. of two)
• [100%] key
• (A) keys
The keys marked (A) can be set to show any ratio using "Add or Change Extra Preset Ratios" in the system settings
(administrator).
• To quickly select a ratio, touch a reduction or enlargement key to select a ratio close to the desired ratio and then
use the zoom keys for fine adjustment.
• The zoom keys can be used to select any ratio from 50% to 200% in increments of 1%.
Touch the key to increase the ratio, or the key to decrease the ratio. (If you continue to touch the /
key, the ratio will change automatically. After 3 seconds, the ratio will change rapidly.)
• As an alternative to touching the keys, you can also directly touch the numeric value display key and
change the value with the numeric keys.
• If the message "Image is larger than the copy paper." appears when an enlargement ratio is selected, the image
may not fit on the paper.
Copy Ratio
OK
Auto Image XY Zoom
129% 64%
77%
100%
%
Zoom
100
8½x11
8½x14 8½x11
5½x8½ 5½x8½ 8½x11
1
2
Copy Ratio
OK
Auto Image XY Zoom
200%
150%
175%
50%
75%
80%
100%
%
Zoom
100
2
2
(A)