Sharp MX-C311 Скачать руководство пользователя страница 769 | Manualshive

Страница: 769 / 849

Sharp MX-C311 Скачать руководство пользователя страница 769

7-68

SYSTEM SETTINGS

Network Settings

Network settings are described below. Touch the [Network Settings] key to configure the settings.

IPv4 Settings

When using the machine on a TCP/IP (IPv4) network, use
this setting to configure the IP address of the machine.
The settings are shown below.

IP Address

Enter the IP address of the machine.

IP Subnet Mask

Enter the IP Subnet Mask.

IP Gateway

Enter the IP Gateway address.

DHCP

Use this setting to have the IP address obtained
automatically using DHCP (Dynamic Host Configuration
Protocol). When this setting is enabled, it is not
necessary to manually enter an IP address.

IPv6 Settings

When using the machine on a TCP/IP (IPv6) network, use
this setting to configure the IP address of the machine.
The settings are shown below.

Enable IPv6 Protocol

Enable this setting.

DHCPv6

Use this setting to have the IP address obtained
automatically using DHCP (Dynamic Host Configuration
Protocol). When this setting is enabled, it is not
necessary to manually enter an IP address.

Manual Address

Enter the IP address of the machine.

Prefix Length

Enter the prefix length (0 to 128).

Default Gateway

Enter the IP Gateway address.

Enable TCP/IP

To use the machine on a TCP/IP network, this setting
must be enabled.

Enable NetWare

To use the machine on a NetWare network, this setting
must be enabled.

Enable EtherTalk

To use the machine on an EtherTalk network, this
setting must be enabled.

Enable NetBEUI

To use the machine on a NetBEUI network, this setting
must be enabled.

Reset the NIC

This returns all "Network Settings" to the factory default
settings.

Ping Command

Use this function to check if the machine can
communicate with a computer on the network.
Specify the IP address of the desired computer and
touch the [Execute] key. A message will appear
indicating whether or not the computer responded.

When settings are changed, the changes will take effect after the machine is restarted. To restart the machine see
"

TURNING THE POWER ON AND OFF

" (page 1-14) in "1. BEFORE USING THE MACHINE ".

• If the machine will be used on a TCP/IP network, be

sure to enable "

" below.

• If DHCP is used, the IP address assigned to the

machine may change automatically. If the IP
address changes, specify the printer port setting
again and then print.

• If the machine will be used on a TCP/IP network, be

sure to enable "

• If DHCP is used, the IP address assigned to the

machine may change automatically. If the IP
address changes, specify the printer port setting
again and then print.

• In an IPv6 environment, the machine can use LPD

or IPP protocol.

«
...
767
768
769
770
771
...
»

Содержание MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов