Sharp MX-C311 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 849

Sharp MX-C311 Скачать руководство пользователя страница 10

7

INSTALLATION REQUIREMENTS

Improper installation may damage this product. Please note the following during
initial installation and whenever the machine is moved.

1. The machine should be installed

near an accessible power outlet for
easy connection.

2. Be sure to connect the power cord

only to a power outlet that meets
the specified voltage and current
requirements. Also make certain
the outlet is properly grounded.

• For the power supply

requirements, see the name plate
in the lower left corner of the left
side of the machine.

Connect the machine to a power
outlet which is not used for other
electric appliances. If a lighting
fixture is connected to the same
outlet, the light may flicker.

3. Do not install the machine in areas

that are:

• damp, humid, or very dusty
• exposed to direct sunlight
• subject to extreme temperature

or humidity changes, e.g., near
an air conditioner or heater

• poorly ventilated.

4. Be sure to allow the required space

around the machine for servicing
and proper ventilation.

5. The machine includes a built-in

hard drive. Do not subject the
machine to shock or vibration. In
particular, never move the machine
while the power is on.

17-23/32"
(45 cm)

11-13/16"
(30 cm)

11-13/16"
(30 cm)

mxc401_us_saf.book 7 ページ２００８年１０月１５日　水曜日　午前１１時５２分

«
...
8
9
10
11
12
...
»

Содержание MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов