5-6
Degree of Match Inspection
5
When a vertical line is selected
Specify the start and end points on the Y
axis. Specify the start and end points
using the up/down/left/right arrow keys.
The points will move along the Y axis
(while keeping the same X coordinate).
Register a reference image
After setting the reference image area, store
an image in the controller as a reference
image.
Select "
REFERENCE IMG" using the up/
down arrow keys and select "REG" from the
popup menu.
SEARCH ARE
Specify the search area (inside the dotted
lines) on the "
SEARCH ARE (MDL0)" line,
using the same procedures used for setting
the reference image area.
Note: Set the menu for MDL1. Setting
procedures are the same as MDL0.
SERIAL NO.
8F053G26
MODEL
IV-C35M
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
RED F
C1 BRT
Y-LINE RESET RETURN
MDL 0
1
S.PT (194.175)
2
E.PT (194.344)
3
MOVE
4
REFERENCE IMG
X:194 Y:344
Setting screen (Y-LINE)
Crosshair cursor
(detection coordinate)
Solid line (reference line)
Dotted line (search line)
X:224 Y:208
SERIAL NO.
8F053G26
MODEL
IV-S30MX
SERIAL NO.
8F053G26
MODEL
IV-C35M
SERIAL NO.
8F053G26
MODEL
IV-S30MX
SERIAL NO.
8F053G26
MODEL
IV-C35M
RECTANGLE RESET RETURN
MDL 0
1
UP.L
(224.208)
2
LO.R
(287.271)
3
MOVE
4
REFERENCE IMG
SET=DECISION ESC=BACK SEL=CHNG IMG TRG=FUNC
RED F
C1 BRT
CONTRAST SRCH
REG
DISP
SERIAL NO.
8F053G26
MODEL
IV-S30MX
SERIAL NO.
8F053G26
MODEL
IV-C35M
RECTANGLE RESET RETURN
MDL 0
1
UP.L (224.208)
2
LO.R (287.271)
3
MOVE
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
RED F
C1 BRT
X:224 Y:139