Sequoia LISST-100X, Руководство пользователя

Страница: 99 / 144

LISST-100X User’s Guide 87
SM Store Mode Setting
Syntax: SM x or sm x, where x is 1 or 0
Description: The Store Mode setting disables (x = 1) or enables (x = 0) data
storage on the internal drive. No Ldddhhmm.DAT file will be created if
store mode is disabled.
It is intended to be used for long-term real-time deployments, where it
may not be desirable to have the data stored on the datalogger to
avoid it filling up.
Example: input: SM 1
output: Data will NOT be stored after each sample!!!
input: SM 0
output: Data will be stored after each sample!!!
Cautions: Be very careful that the correct store mode is selected before a
deployment where it is the intent to store the data internally on
the instrument datalogger!
Issue a DS command to verify the status of the store mode setting. A
warning will be displayed as part of the DS status if the store mode is
disabled:
WARNING: Data storage disabled. Data will not be saved!!!
ZD Reset Depth Sensor Offset
Syntax: ZD or zd
Description: The ZD (or zd) command resets the depth sensor offset so that the
sensor reads a depth of 0m at zero depth (in air). You must issue the
ZD command, then select 1 (yes) or 0 (no) to reset depth sensor
Example: input: ZD
output: Depth Sensor Offset Reset Procedure Started.
Instrument must be at zero depth and similar temperature to field
conditions.
Do you wish to reset Depth Sensor offset? (1=yes,0=no): [0] ? 1
Previous offset was -14.03. New offset is -13.87.
Previous Depth was -0.15 meters.
New Depth using corrected offset is 0.00 meters.
Cautions: None
Acquisition/Action commands
DL Delete file from Compact Flash Module
Syntax: DL filename or dl filename where filename is the name of the file to
be deleted.
Description: DL command is used to delete file from the Compact flash module.
Wildcards such as *.* can be used.