Sequoia LISST-100X, Руководство пользователя

Страница: 95 / 144

LISST-100X User’s Guide 83
If no value follows command, prompts will be displayed for the value.
Example: input: MA 10
output: New Measurements per Average: 10
Cautions: None
ST Set Start Condition
Syntax: ST x or st x, where x is the start condition code described below
Description: The ST command sets the start condition to be used when the GO
command is issued. The start condition options are:
1 = Depth Start
2 = Time/Date Start
3 = Mechanical Switch Start
4 = Digital Input Start
5 = Delay Start
If no value follows command, prompts will be displayed for the value.
Example: input: ST 5
output: New Start Condition Setting: Delay Start
TD Set Start Condition Data
Syntax: TD x or td x, where x is the start condition data described below
Description: The TD command sets the start condition data to be used when the
GO command is issued. The start condition data is used with the
Start Condition setting as follows:

If the Start Condition is Depth Start (option 1) the input will be
start depth in meters.

If the start condition is set to Time/Date Start (option 2) the
input for TD will be the start date and time.

If the Start Condition is Delay Start (option 5) the input will be
time delay in seconds.

The TD setting is ignored for Mechanical Switch Start (option
3) or Digital Input Start(option 4).
If no value follows command, prompts will be displayed for the value.
Example: input: TD 3 (if Start Condition = 1 (Depth Start))
output: New Start Condition data = 3
Start Condition: Depth Start at 3 meters
input: TD 12/31/05 23:59:59 (if Start Condition = 2 (Time/Date Start))
output: New Start Condition data = 12/31/05 23:59:59
Start Condition: Time Start at 12/31/05 23:59:59
Input: TD 2 (if Start Condition = 5 (Delay Start))
Output: New Start Condition data = 2
Start Condition: Delay Start with 2 minute delay
SP Set Stop Condition