Sequoia LISST-100X, Руководство пользователя

Страница: 43 / 144

LISST-100X User’s Guide 31
The Auxiliary Parameters window can be opened during the Real-
Time session so that the values of various parameters such as
depth and transmission can be monitored. The raw scattering
values on the detector rings can also be viewed by selecting
View
Rings from the DataFrames menu. A typical display is shown
below.
The view rings display is also available when processing a Raw
Data file. However, it is not available when viewing a processed
Size Distribution file.
Step 22: Put
instrument back
to sleep
After finishing with the instrument it should be put back into its low
power sleep mode. In this mode, with the communication cable
disconnected, the drain on the battery is only about 80 µa. The
sleep mode can be used for extended periods. However, it is
recommended that for long term storage that the Main battery be
disconnected.
To put the instrument in to low power sleep mode choose Put
LISST to Sleep from the LISST menu or using the buttons on the
toolbar. To get the lowest power consumption the Communications
cable must be disconnected from the instrument.
The above steps are meant to give a brief introduction to most of
the procedures that are required to operate the LISST-100X. Most